 |
|
|
| NS3 1-3 Bathroom |
NS6 4-6 Bathroom |
| Model: |
NS3 |
Model: |
NS6 |
| Buy Now |
Buy Now |
| |
|
|
What makes NaturSoft different from similar technologies?
Unlike other systems on the market, the NaturSoft systems requires only 3 seconds of contact with the water, while the others require 9 seconds or more. The Pelican NaturSoft is unlike any other system on the market. The NaturSoft is made in the USA and is sold only by Pelican Water Technologies.
Another benefit of going with Pelican is the lifespan of the NaturSoft catalytic granules. NaturSoft catalytic granules have been rigorously tested in the real world, used in the commercial industry, and made to be non-sacrificial, therefore it requires no "rest time", and requires no replacement. Other similar technologies require replacement every 3-5 years at costs of $600-$1,000 and require you not use their systems for 8 hours a day for proper rest!
Why does the NaturSoft handle 75 grains while others only handle 25 grains of hardness?
The NaturSoft’s catalytic granular surface is 100% active and grows seed crystals on the entire surface. Other similar technologies only have "growth sites" that are active, leaving more than 70% of the surface inactive.
If the water hardness is tested after the system is installed will the hardness level be different?
If the water is tested after the NaturSoft™ System is installed the hardness level will remain the same or even test slightly harder due to the existing scale being removed from the plumbing. Once the plumbing lines are de-scaled, the hardness will revert to the original hardness level. The healthy minerals will remain in the water without the negative side effects.
Do the NaturSoft™ Systems have any negative effects on the human body?
No, if your water supply is safe before it enters the NaturSoft™ System it will be safe after the system. NaturSoft™ Systems do not add any chemicals to the water therefore there is no harmful effect. NaturSoft™ Systems leave in the beneficial minerals that are healthy for the human body.
Why do the Pelican™ Systems not require backwashing?
Pelican™ Systems operate in an up-flow design rather than the traditional down-flow. The reason for backwashing is to fluff the media bed and not to wash out contaminants as most people are lead to believe. The Pelican Systems media is continuously being fluffed in the up-flow design from the normal water flow. Other down-flow systems have a tendency to channel causing the media to be ineffective. The Pelican™ Systems uses an up-flow design to be more effective and avoid those possibilities.
The NaturSoft™ Difference - Shipping Advantage
The Pelican™ NaturSoft™ Salt-Free Water Softener/Conditioner will be shipped preloaded via UPS Ground in the highest quality doubled walled box with side cushions and a custom top piece to protect the top of the filter. No expense has been spared to ensure your system arrives in factory fresh condition. These systems travel long distances, so we feel it is vital that the packaging be of the utmost quality.
Additional References:
|
